Zone Offroad adds to its lineup of suspension lifts and accessories for the 2011-2016 Ford Super Duty with complete 8" lift systems allowing the clearance for 38" tires. These new systems are designed to correct suspension geometry and retain on-road ride quality these new systems use full length coil springs, beefy radius arm drop brackets along with heavy duty track bar bracket and steering correction, and FOX 2.0 adventure series gas shocks. Out back lift is provided via a lift block and dual add-a-leaf to level the stance. As with all Zone lift kits, these kits are backed by Factory Protection Plus, the comprehensive extended warranty giving you peace of mind on or off the road with a 5-year, 60,000-mile drivetrain warranty and Zone Offroad's limited lifetime warranty.
Product Description
8" Lift Kits for '11-16 Ford Super Duty
Vehicle Fitment
2011-2016 Ford F250 Super Duty 4WD*
2011-2016 Ford F350 Super Duty 4WD SRW*
2011-2016 Ford F350 Super Duty 4WD DRW*
*diesel trucks only
Rec'd Max Tire/Wheel Size
38x13.50 or 38x15.50 Tires
on 17x9/18x9/20x9/22x9 Wheels (4.5-5" BS)
or 17x10/18x10/20x10/22x10 Wheels (4.5-5" BS)
*Trimming/bumper spacer may be required for wider tires/wheels
Kit Notes
- On gas models - front exhaust modification may be required for proper driveshaft clearance.
- If equipped with 2-piece rear driveshaft, order #F5401 carrier bearing drop kit.
- Although rear, front driveshaft vibration may occur in 4WD.
- If equipped with a factory rear sway bar, order #F5009 extended links.
Available Accessories
Dual Steering Stabilizer Kits (#3350/7350)
Carrier Bearing Drop Kit (#F5401)
Rear Sway Bar Links (#F5009)
- 5-year, 60,000 mile drivetrain warranty
- Zone’s Limited Lifetime Warranty
*** Check Zone website listings or local dealer prior to ordering to verify current listings ***
Media Gallery
Zone Offroad adds to its lineup of 1", 2", 4" and 6" lift systems for the 2011-2016 Ford Super Duty with new 8" lift systems to improve the appearance and offroad capability while maintaining on road ride quality with room for 38" tires to be installed.
At the heart of these new 8" lift systems are a pair of frame mounted radius arm drop brackets to correct radius arm geometry. These brackets are built from 1/4" steel and key off the factory radius arm pockets and tie into the frame rail for extra rigidity. Full length replacement coil springs are supplied to provide the extra altitude. These springs are specially designed for the weight of the the diesel trucks and pairs with the FOX 2.0 adventure series gas shocks to provide a smooth ride on and off-road. Steering correction comes from a forged drop pitman arm to improve operating angle while a massive 1/4" steel fabricated track bar drop bracket is used to reposition the track bar mount to recenter the front end and keep the steering linkage angles in phase for predictable handling. Also included 8" lift kit are sway bar relocation brackets, brake line drop brackets, ball joint alignment cams, bump stop extensions and new steering stabilizer mounts. In the rear this kit retains the rear leaf springs and replaces the factory blocks with 6" fabricated rear lift blocks with integrated bump stop wings, dual add-a-leafs, longer u-bolts and new u-bolt plates. This setup offers increased load capacity and a level stance to the front. Also supplied for the rear is a replacement brake line bracket and matching FOX 2.0 adventure series gas shocks to pair with the front for improved performance.
As far as available accessories, Zone Offroad offers dual steering stabilizer kits offered with your choice of hydro or nitro series cylinders for improved steering control over rough terrain. For trucks equipped with a 2-piece rear driveshaft Zone Offroad has a carrier bearing drop kit available to improve rear driveline angle to eliminate potential driveline vibrations. Get your 2011-2016 Ford Super Duty up in the air with high quality, American made 8" lift systems and accessories from Zone Offroad.
© Zone Offroad Products, 491 W. Garfield Ave. Coldwater, MI 49036
888–998–Zone (9663) | zoneoffroad.com | [email protected]
Good morning. My question is, if I have to use my factory radius arms on my 15 f250. Can I buy some new arms to add to the kit, and if so what kind?
Hey Balde, the kit is designed to retain the factory spec’d radius arms and corrects the operating angle with a 6″ drop mount on the frame. Any 0-2″ stock replacement arms will work on there, unfortunately our HD radius arms are designed for 4-6″ of lift so they shouldn’t be used in combination with the kit.