New in 2016, Chevy/GMC are now offering their midsize Colorado/Canyon platform with an available 2.8L Duramax diesel engine. The engineers at Zone Offroad have stepped up with a suspension lift compatible with gas and diesel engine equipped Colorado/Canyon trucks. Designed for improved ground clearance and offroad capability, the 5.5" IFS System allows for up to 33" tires to be installed. This system is built to perform and has been independently confirmed compliant with government mandated (FMVSS No.126) ESC System standards to not adversely effect the functionality of the OEM installed electronic stability control system keeping you and those around you safe on the road.
- 5-year, 60,000 mile drivetrain warranty
- Zone’s Limited Lifetime Warranty
Product Description
Zone Offroad Lift Kits for Duramax Colorado/Canyon
Vehicle Fitment
2015-2016 Chevy Colorado 4WD (Gas/Diesel)
2015-2016 GMC Canyon 4WD (Gas/Diesel)
5.5'' Kit Features
- FMVSS No.126 (ESC System) compliant
- Heavy duty fabricated crossmembers
- Ductile iron steering knuckles
- Diff relocation to improve CV angle and allow use of stock driveshaft
- Top mounted strut spacer to retain factory ride quality and speed up installation time
- Allows for 33" tires to be installed
Kit ID Number(s)
#C39 (w/ Hydro Shocks)
#C39N (2/ Nitro Shocks)
MSRP
$1299.95 (C39)
$1310.49 (C39N)
Rec'd Wheel/Tire Specs
295/70r17 tires on 17x8 wheels w/ 4.5" BSing (or comparable 18-20" wheels)
305/55r20 tires on 20x9 wheels w/ 5.25'' BSing (or compatible 17-18" wheels)
Available Accessories
#7757 Nitro Rear Shocks
© Zone Offroad Products, 491 W. Garfield Ave. Coldwater, MI 49036
888–998–Zone (9663) | zoneoffroad.com | [email protected]
This 5.5" IFS System comes complete with a new ductile cast iron steering knuckles. The new knuckles position the critical steering and control arm mounting locations and work in harmony with the heavy-duty fabricated crossmembers. Along with new crossmembers, the provided differential drop brackets lower and reposition the front differential for correct CV shaft angles and still allow for use of the factory front driveshaft. A front driveshaft spacer is included to adjust the length and retain optimum CV joint position. To improve offroad protection, a full width differential skid plate is supplied tying the two crossmembers together for extra rigidity. To retain OEM ride quality the factory struts are retained and a top mounted strut spacer is installed to gain the full 5.5" of lift. The strut spacer design also speeds up installation, as it does not require any strut disassembly. Also included are extended sway bar links, bump stop extensions and brake line relocation to complete the front of this 5.5" kit. Out back, the rear kit uses a 4" block and u-bolt kit to lift and level the stance. Finishing off the rear this 5.5" IFS systems is offer your choice of hydro or nitro gas shocks. Get more from your new 2016 Colorado/Canyon Duramax and fit 33" tires with Zone Offroad.
5.5'' IFS Lift Systems
Click image to view and save high-res image.
2016 Diesel Colorado Images
Click image to view and save high-res image.
Can the kit be outfitted with coilovers like the BDS kits are?
Hey Robert, thanks for reaching out. The FOX 2.5 remote coilovers offered in BDS’s kits are compatible with our lifts as well. We don’t offer them, they would need to be purchased through BDS or one of their dealers.
Running 285 70 17 with 17″ x 8.5″ rims (4.75″BS); will those be compatible?
Hey Alec,
Unfortunately those particular wheels cannot be used with our 5.5″ IFS lift kit unless you’re installing a small (1/4″) wheel spacer to bring them out to our recommended 4.5″ BS. Reason for this is the an interference issue with steering that requires the 4.5″ BS unless going to a 20″+ diameter wheel