4-6″ Lift Kits | 17-19 Ford Super Duty | NPA #206

4-6″ Lift Kits | 17-19 Ford Super Duty | NPA #206
blog_header-ZONE
F250-4-6in-01

Zone Offroad expands its lineup for the 2017-2019 Ford Super Duty with several new 4" and 6" lift kit options and accessories. These new listings fill out several of the gaps in catalog listings to include standard and radius arm kits, gas and diesel options along with dual steering stabilizer kits. As with all Zone lift kits, these kits are backed by Factory Protection Plus, the comprehensive extended warranty giving you peace of mind on or off the road with a 5-year, 60,000-mile drivetrain warranty and Zone Offroad's limited lifetime warranty.

Product Title

New 4"/6" Lift Kits
for 2017-2019 Ford Super Duty

Vehicle Fitment

2017-2019 Ford F250 Super Duty 4WD
2017-2019 Ford F350 Super Duty 4WD

Rec'd Wheel/Tire Specs

4" Kits:
37x12.50 Tire on 17x9 Wheel (4.5" BS)

6" Kits:
38x13.50 Tire on 17x9 Wheel (4.5-5" BS)

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain warranty
  • Zone’s Limited Lifetime Warranty

Kit Info

Standard Lift Kits: (drop bracket)
#ZONF49 (-/N/F) - 4" Standard Kit (Gas/2-Leaf)
#ZONF106 (-/N/F) – 4” Standard Kit (Gas/3-Leaf)
#ZONF110 (-/N/F) – 6” Standard Kit (Diesel/2-Leaf)
#ZONF111 (-/N/F) – 6” Standard Kit (Diesel/3-Leaf)
#ZONF112 (-/N/F) – 6” Standard Kit (Gas/2-Leaf)
#ZONF113 (-/N/F) – 6” Standard Kit (Gas/3-Leaf)

Radius Arm Kits:
#ZONF104 (-/N/F) - 4" Radius Arm Kit (Gas/2-Leaf)
#ZONF105 (-/N/F) – 4” Radius Arm Kit (Gas/3-Leaf)
#ZONF108 (-/N/F) – 4” Radius Arm Kit (Diesel/2-Leaf)
#ZONF109 (-/N/F) – 4” Radius Arm Kit (Diesel/3-Leaf)

Available Accessories

#ZONF102N - Dual Nitro Stabilizer Kit
#ZONF102F - Dual FOX Adv Stabilizer Kit
#ZONF5401 - Carrier Bearing Drop
FOX Adventure Series IFP Shocks

Coldwater, MI: Zone Offroad adds to its uper Duty lineup with several new 4"/6" lift kit options for the 2017-2019 Ford Super Duty allowing clearance for up to 37-38" tires. Kits include:

4"/6" Standard Lift Kits: These complete 4" and 6" lift kits are designed to lift and level the stance while retaining the ride quality and suspension geometry. Up front the truck is lifted with a pair of full length replacement diesel or gas engine specific coil springs designed for better all around performance. To maintain the suspension geometry with the additional lift a pair of 1/4" thick radius arm drop brackets are bolted into the factory frame mounts to correct the caster positioning. Steering correction comes from a forged drop pitman arm to improve operating angle while a massive 1/4" steel fabricated track bar drop bracket is used to reposition the track bar mount to recenter the front end and keep the steering linkage angles in phase for predictable handling. Also included for the front are sway bar relocation brackets, brake line drop brackets, bump stop extensions and new steering stabilizer mounts to install the Zone stabilizer cylinder. Finishing off the front is your choice of Zone nitro series twin tube gas shocks or FOX 2.0 adventure series IFP monotube gas shocks for improved ride quality and offroad performance. In the rear this kit uses a replacement lift block (plus an add-a-leaf for 6" kits) and longer u-bolts to level out the stance along with a pair of matching shocks.

4" Radius Arm Lift Kits: Joining the existing 4"/6" radius arms kits are new 4" radius arm options designed for improved strength, ground clearance and caster correction. These complete kits are designed to lift and level the stance with room for up to 37" tires. Front lift comes from a pair of front full length coil springs to pair with your choice of Nitro series gas twin tube or FOX 2.0 Adventure series monotube shocks. The front axle is repositioned using a pair of heavy duty replacement radius arms that bolt in place of the factory stamped steel arms. These arms are built from high strength 1/4" steel, boxed and fully welded with large 2.5" greaseable bushings to isolate road vibrations and improve ground clearance over drop bracket kits. Steering correction comes from a forged drop pitman arm to improve operating angle while a massive 1/4" steel fabricated track bar drop bracket is used to recenter the front end and keep the steering linkage angles in phase for predictable handling. Also included for the front are sway bar relocation brackets, brake line drop brackets, bump stop extensions, and single steering stabilizer kit. In the rear these kits retain the factory overload equipped leaf springs and lift is provided via a replacement lift blocks and longer u-bolts. Finishing off the rear is a rear brake line bracket and tour choice of rear gas shocks to match the front of the truck.

Media Gallery

4"/6" Standard Lift Kits

4" Radius Arm Lift Kits

© Zone Offroad Products, 491 W. Garfield Ave. Coldwater, MI 49036
888–998–Zone (9663) | zoneoffroad.com | [email protected]

Leave a Reply

Your email address will not be published. Required fields are marked *