Adventure Pro Series UCAs for 2021 Ford Bronco | NPA #193

Adventure Pro Series UCAs for 2021 Ford Bronco | NPA #193
blog_header-ZONE
ZPR-F2302-0

Upgrade your Bronco's stock upper control arms with these high strength Adventure Pro Series units from Zone Offroad. Designed for use on lifted setups these arms all for increased droop travel, improved strength and great looks.

Product Title

Adventure Pro Series Upper Control Arms
for 2021 Ford Bronco

Vehicle Fitment

2021 Ford Bronco 2-Door*
2021 Ford Bronco 4-Door*
*all trim levels

Install Time

1-2 Hours
2of5 Difficulty

Factory Protection Plus
  • 5-year, 60,000 mile drivetrain warranty
  • Zone’s Limited Lifetime Warranty

Kit Info

F2302 – Adventure Pro Series Upper Control Arm Kit

Features/Benefits

High strength steel casting ready for offroad abuse and durability.
Specially designed to optimize suspension and tire clearance.
Indexed ball joint cup designed to increased travel on lifted models.
Preinstalled vulcanized rubber bushings for smooth, quiet operation.
Designed to accept the OE ball joint to maintenance free operation.
Ball joint removal/installation tool to easily swap ball joints.
Designed and manufactured in the USA.

Compatible With

F1102 - 1" Leveling Kits - link
F1220 - 2" Lift Kits - link
F94/F95/F96/F97/F100/F101 - 3-4" Lift Kits (UCAs supplied with these kits) - link
Stock ride height Bronco w/ Sasquatch package
Most lift kits on the market

Coldwater, MI: Zone Offroad is now shipping Adventure Pro Series upper control arms for the 2021 Ford Bronco. These new pro series arms offer great styling, maximum strength and maintenance-free operation. They use a specially treated steel casting for strength and rigidity and have been designed to optimize suspension and tire clearance for a wide variety of suspension-tire-wheel combinations. The sleek styling looks great and is finished in a durable charcoal gray powdercoat with Zone nameplates. Whether your adding lift spacers, have Sasquatch, running coilovers or going up to 4” of lift, these arms will work for you to not only correct camber, but allow for increased droop travel on lifted applications.

These arms are designed as a stock replacement on lifted applications. At the frame mount you’ll find vulcanized rubber bushings preinstalled in the arms. These bushings are designed specifically for the Bronco application and provide smooth, quiet suspension travel while helping isolate any road noise or vibrations. At the other end of these particular control arm kit you’ll find the ball joint cup has been reindexed for use on lifted Broncos and reuses the factory upper ball joint. The reason for this has to do with the impressive amount of travel the stock ball joints offer at stock ride heights. Once lifted, this travel is limited due to the operating angle so the Zone Adventure Pro arms are designed get that lost travel back and provide optimal up and down travel from your suspension. This does require you to press out the factory ball joints and we provide a special tool as part of the kit to make this quick and easy. Once installed in the new arms, Zone provides a protective cap for the upper control arms to keep out any dirt or debris. The end product is a pair of high quality upper control arms built to perform under your Bronco, no maintenance or upkeep needed. Upgrade your lifted Bronco’s control arms with these Adventure Pro Series UCAs from Zone Offroad.

Media Gallery

F2302 Shown

F2302 Shown

F2302 Shown

Bronco Roadmap Plans

What's Zone Offroad got coming for the new Bronco? We're working through the development and testing on a wide range of lift options and accessories for the new Bronco to include 1-6" lift options. Check the video with more info and check out the Bronco roadmap post at Bronco Roadmap - Zone Blog

 

© Zone Offroad Products, 491 W. Garfield Ave. Coldwater, MI 49036
888–998–Zone (9663) | zoneoffroad.com | [email protected]

Leave a Reply

Your email address will not be published. Required fields are marked *