Zone Offroad is now shipping a lift kits for the 2021 Chevy and GMC 1500 4WD Trucks. These kit offerings are based on the widely popular 2019-2020 GM1500 trucks, now confirmed compatible with the 2021 models of the Silverado, Silverado Trail Boss, Sierra, Sierra AT4 and Sierra Denali. Kit offerings include the 2", 3.5", 4" and 6" lift kits as well a optional accessories allowing clearance for up to 37" tires. These ktis include Factory Protection Plus, the comprehensive extended warranty giving you peace of mind on or off the road.
Leveling Kits, Lift Systems, and Accessories
for the 2021 Chevy/GMC Trucks
2019-2021 Chevy Silverado 1500 4WD
2019-2021 Chevy Silverado 1500 Trail Boss 4WD
2019-2021 GMC Sierra 1500 4WD
2019-2021 GMC Sierra 1500 AT4 4WD
2019-2021 GMC Denali 1500 4WD (w/ ARC)
Silverado/Sierra 1500 4WD:
#C1222 – 2” Leveling Kit
#C47/C47N/C47F – 3.5” Adv. Series UCA Lift Kit
#C42/C42N/C42F – 4” IFS Lift Kit
#C41/C41N/C41F – 6” IFS Lift Kit
Silverado Trail Boss /Sierra AT4 1500 4WD:
#C1171 – 1.75” Leveling Kit
#C44/C44N/C44F – 4” IFS Lift Kit
Sierra 1500 Denali 4WD (w/ ARC):
#C1223 – 2” Leveling Kit
#C46 - 4" IFS Lift Kit
#C45 - 6" IFS Lift Kit
#C2314 – Adventure Series UCA Kit
#C5653 – Zone Skid Plate (for 4-6” IFS Kits)
Coldwater, MI: Zone is now shipping a variety of kit options for the 2021 Chevy/GMC 1500 trucks. These kits are a carry over from 2019-2020 fitments now confirmed compatible with 2021 models. These kits include:
2" Leveling Kit: These kits are designed for quick and easy install workign within the factory suspension parameters to improve ground clearance, level out the stance and allow fitment of larger tires. Kit includes high strength strut spacers, mounting hardware and options weld on steering stops. 1.75" lift achieved on Trail Boss/AT4 models. Denali models with ARC include sensor relocation brackets.
3.5" Adventure Series UCA Kit: More than a leveling kit without diving into a full IFS lift kit, these 3.5" Adventure Series lift kit takes advantage of factory suspension geometry for more lift, improved performance and clearance for up to 35" tires. At the heart of these kits are a pair of Adventure Series upper control arms to for more strength and increased suspension travel. Lift is provided by a 2-piece, combination top-mount and preload strut spacers design to provide a full 3.5" of lift without overextending the suspension at full droop (as is the case with kits using just a top mounted spacer). Wheel spacer and weld-in steering stops are supplied for use with stock wheels. In the rear 2" lift blocks and new u-bolts lift and level the stance along with your choice of gas shocks.
4" & 6" IFS Lift Kit: Stepping up to the 4" and 6" lift heights these kits are designed around maintain original suspension-steering-driveline geometry for to help you retain on-road comfort and handling characteristics while improving offroad performance with clearance for up to 35-37" tires. Kits include a pair of 1/4" steel drop crossmembers to reposition the stock lower control arms for additional ground clearance. A differential skid plate reinforces the subframe while adding protection for critical steering and driveline components. A pair of specially designed steering knuckles maintains proper steering geometry and ESC system compatibility, and allows for 17" or larger aftermarket wheels to be installed - as well as the stock 20's. The front differential is secured using a multipoint differential relocation brackets to keep the CV axle operating angles at a minimum. Lift is provided by a set of top-mounted strut spacers that allow for easy installation without the need to disassemble the factory struts. A pair of sway bar drop brackets are used to correct the operating angle of the factory sway bar and to reinforce the rear crossmember and frame. In the rear, a 3" or 5" lift block and longer u-bolts lift replace the factory block and level that stance at either the 4" or 6" lift heights. Finishing out the rear are rear brake line and ABS line relocation brackets and your choice of gas shocks.
Adventure Series UCA Kit: Adventure Series upper control arms dwarf the factory arms they directly replace. Made from fully-welded, 1/8" steel plate with CNC-machined ball joint and bushing mounts, these arms one-up factory components by providing a significantly increased range of travel and work in conjunction with stock-style rubber mount bushings to provide a quiet ride.
Zone Skid Plate: Add front end protection to your Zone Offroad 4" or 6" lift kit equipped Chevrolet or GMC 1500 truck or SUV. These skid plates are build from high strength 3/16" steel and includes a laser cut Zone logo for styling points. Installs quick and easy to the front crossmember in place of the factory plastic splash guard.